HOME PAGE
ABOUT US
WHAT'S NEW
CONTACT  US
APPLICATION NOTES
PRODUCTS (by Model Numbers)
PRODUCT CATEGORIES:
  Accessories
      cables
      connectors
      mic accessories
      selectors
  Cases and Cabinets
  DJ Products
  Headphones
  Karaoke Systems
  Lighting
  Microphones
  Mixers/Amps
      power amplifiers
      mixing amplifiers
      mixers
  PA Systems
      waist-band
      wireless
  Players
  Sound Effectors
  Speakers
  Stands & Mounts
  Trusses
  Wireless Systems

ACO8103 - Dual 2-3-Way / Mono 4-Way Active Crossover

The Audio2000'S^® ACO8103 unit is a dual 2/3-way or a mono 4-way active crossover  for professional sound  applications.  The ACO8103 is configured to be rack-mountable.

The ACO8103 active crossover contains two channels, left channel and right channel. Each channel can be selected to be utilized as either a two-way active crossover or a three-way active crossover. 

When the ACO8103 is to be utilized as a two-way active crossover, the "Selector Way" switch needs to be set to "2W-1" or "2W-2". The "Low Level" and "High Level" knobs are used to adjust the low-pass output level and high-pass output level respectively. At the "2W-1" mode, the "Mid Level" and "2K-10K" knobs will be disabled and the "200-2K" knob will be used to adjust the crossover frequency, f_c, in the audio frequency range of 200Hz - 2KHz.  At the "2W-2" mode, the "Mid Level" and "200-2K" knobs will be disabled and the "2K-10K" knob will be used to adjust the crossover frequency, f_c, in the audio frequency range of 2KHz - 10KHz.

When the ACO8103 is to be utilized as a three-way active crossover, the "Selector Way" switch needs to be set to "3W".   At the "3W" mode, the  the "200-2K" knob will be used to adjust the low crossover frequency, f_cl, in the audio frequency range of 200Hz - 2KHz while the "2K-10K" knob will be used to adjust the high crossover frequency, f_ch, in the audio frequency range of 2KHz - 10KHz.  The "Low Level", "Mid Level"  and "High Level" knobs are used to adjust the low-pass output level, mid band-pass output level and high-pass output level respectively.

If one channel, say left channel, is set to "3W" while the other channel, right channel in this case, is set to "2W-1", a 4-way active crossover can be achieved by routing the low frequency output from the left channel to the input of the right channel.  With such a setup, the high frequency output and the mid frequency output from the left channel become the high frequency output and mid-high frequency output of the 4-way active crossover while the high frequency output and the low frequency output from the right channel become the mid-low frequency output and low frequency output of the 4-way active crossover.  The high crossover frequency, f_ch, and the mid crossover frequency, f_cm, are controlled by the "2K-10K" knob and "200-2K" knob respectively.  The low crossover frequency, f_cl, is controlled by the "200-2K" knob in the right channel.

Three phase selector buttons in each channel are provided to have the high frequency band, mid frequency band and low frequency band assigned with a 0-degree phase or 180-degree phase individually.  A peak LED indicator is provided in each channel to indicate the saturated input signal condition.

As a result, the ACO8103 active crossover provides the users with not only the extraordinary sound quality but also the excellent application versatility and effectiveness.

APPLICATIONS

DJ/KJ; institution, corporate, and live sound reinforcement

SPECIFICATIONS

Inputs	Balanced, Unbalanced
Input sensitivity / Impedance	0dB / 47K Ohms
Maximum Input Level	4V (RMS), T.H.D. 0.05%
Outputs	Balanced, Unbalanced
Output Level / Impedance	0dB / 600 Ohms
Frequency Response	10 - 20K Hz  (+/- 3dB)
Signal-to-Noise Ratio (IEC)	95dB
Frequency Control	LOW 200Hz - 2KHz  HIGH 2KHz - 10KHz
Power Requirements	120V AC, 60Hz - USA/Canada 240V AC, 50Hz - UK/Australia
Dimension	481 X 65 X 300mm (18.9" X 2.56" X 11.8")
Weight	4.0Kg  (8.8lb)

Back to Top